1U CPCI Systemsfrom Comtel Electronics GmbH1U, 19" rack-mount system with hot removable CPCI 3U Power Supply, four Fans, and CompactPCI backplane ...
- Horizontally mounted 6U 160 mm boards and rear I/O 80 mm
- EMC and ESD optimized steel construction
- Active heat dissipation of the boards via convection from side to side
- Four fans 40 x40 mm with fan fail LED on front
3U CPCI Systemsfrom Comtel Electronics GmbH3U, 19" rack-mount system ...
- Horizontally mounted 6U 160 mm boards and rear I/O 80 mm
- EMC and ESD optimized steel construction
- Active heat dissipation of the boards via convection from side to side
- Two powerful fans 120 x 120 mm
4U CPCI Systemsfrom Comtel Electronics GmbH19" rack-mount ...
- Horizontally mounted 6U 160 mm boards and rear I/O 80 mm
- EMC and ESD optimized steel construction
- Active heat dissipation of the boards via convection from side to side
- Six powerful fans 80 x 80 mm
VXS BP VITA 41.xfrom Comtel Electronics GmbHThe Comtel VXS backplane 8 and 21 slots match performance and cost-effectiveness by realizing a fully optimized ...
- VXS provides the high-speed switched serial performance of VITA 41
VME64x VITA1.1-1997from Comtel Electronics GmbHComtel's VME64x backplane range includes a large variety of VME64x backplanes, 2-21 slots ANSI/VITAV 1.1-1997 ...
- VME64x backplane, 6U 2-21 slots Including J1, J2, and J0
- SMD technology for excellent signal integrity
- High current power entry taps positioned near corresponding connector pins for minimum current paths
- Optional decoupling capacitor positions
- 35 more ground return pins on J1/J2 for improved signal integrity
VITA 31.1 Backplanefrom Comtel Electronics GmbHANSI/VITA 31.1, GbE on VME64x backplane adds GbE to backplanes via a P0 connector as defined in VME64x ...
- 19 VITA 31.1 node slots (21-slot backplane) or 6 VITA 31.1 node slots (8-slot backplane)
- Custom configurations up to 21 slots
ATCA CO2 - 2 Slot 2Ufrom Comtel Electronics GmbHAdvancedTCA 2U, 2 slot horizontal Central Office Shelf 19" rack mounted or desktop 2U system with redundant PPS ...
- Highly efficient packaging with greater than 200 W per slot cooling (RTM 25 W)
ATCA CO6 - 6 Slot 5Ufrom Comtel Electronics GmbHAdvancedTCA 5U, 6-slot Horizontal Central Office Shelf 19" rack mounted or desktop 5U system with redundant PPS ...
- Highly efficient packaging with greater than 200 W per slot cooling (RTM 25 W)
ATCA 4500W AC PSUfrom Comtel Electronics GmbHComtel 1U, AC - DC 48 V power supply shelf up to 4500 W, with three independet hot swap power module 1500 W each...
- 19" 1U high
- Parallel able rack for power share
ATCA CO5 - 5 Slot 5Ufrom Comtel Electronics GmbHAdvancedTCA 5U, 5 slot Horizontal Central Office Shelf ...
- 5 slot 10 Gbps Backplane, with replicated full mesh fabric connections
- Highly efficient packaging with greater than 200W per slot (RTM 30 W)
ATCA CO16 - 16 Slot 13U ETSIfrom Comtel Electronics GmbHAdvancedTCA 13U, 16-slot Central Office shelf, ETSI System dual star and full mesh backplanes topologies ...
- 16-slot 10 Gbps backplane, with dual star topologies fabric connections
- Redundant EMC filtered power feeds
- Power distribution 300 W per slot
- Predictive failure analysis reduces cost of ownership
Comtel ShMC PPS M500from Comtel Electronics GmbHComtel Shelf Manager Controller based on Pigeon Point Systems IPM Sentry M500 ...
- RS-232 interface
- Lithium battery for the ShMM RTC intrusion detection
- Status indicator for importance interfaces using on board LED's
- Lithium battery for the ShMM RTC intrusion detection
- Status indicator for importance interfaces using on board LED's
Thermal Load Boardfrom Comtel Electronics GmbHDesigned for analysis of cooling efficiency of AdvancedTCA chassis ...
- RTM - Power dissipation up to 30 W
- RTM power set in two zones
- One temperature sensors on the RTM
- Setting zones power dissipation using IPMI Command
CO-Pizza 2-Slot Replicated Mesh ATCA Shelf from Comtel Electronics GmbH2 slots electrically and mechanically compliant to the PICMG 3.0 AdvancedTCA specification ...
- Push-pull cooling with hot-swap redundant Fan Trays
- The Comtel Pizza Box units are powered by dual primary 48 V A and B (4 feeds) The units receive power through a Power Entry Module (PEM) at the rear of the unit
- Shelf cooling capacity will handle 200 W boards. The rear area handles 30 W modules